Looking for:
SolarWinds Platform agent requirements
Aug 13, · When you are away from your office, you can open a web browser and access Remote Web Access from anywhere that has Internet access. Remote Web Access is turned off by default. To use the Remote Web Access functionality, you can turn it on using the Set Up Anywhere Access Wizard, and then set up your router and domain name. You can follow the. Oct 03, · When you turn on the Anywhere Access functionalities, Remote Web Access, virtual private network, and DirectAccess in Windows Server Essentials, or in Windows Server R2 with the Windows Server Essentials Experience role installed, they enable your network users to access server resources from any location with an Internet connection, at. Oct 03, · When you turn on the Anywhere Access functionalities, Remote Web Access, virtual private network, and DirectAccess in Windows Server Essentials, or in Windows Server R2 with the Windows Server Essentials Experience role installed, they enable your network users to access server resources from any location with an Internet connection, at.
Hardware and software requirements
Looks like you’re running the sep. I’m not very familar with it, unfortunately. Looks like your only running AV anyway so I’m not sure why it would be the cause here. All was working before SEP was installed. So when you mean i have to add a site to the Internel Explorer Trusted Sites what do you mean exactly?
Or i must add Tursted sites on the client computers? This seems strange, because if i unistall SEP all get’s back to work properly. Not the enterprise version of SEP we initially thought. Support would be able to help you on this. I have already add the pages to the tursted websites in internet explorer both in the server and also on the client computers and still don’t work.
Problem is not related with this. And yes im using the Symantec Endpoint Protection Cloud Version and i have already open a ticket with Symatec support but after several replyes they still seem not to understand what my problem is. They keep sending me links of the KB with manual on how to setup custom exceptions, etc Is not this the right forum for the SEP im using?
Is there a more appropriate forum for me to ask help? You can read the discussion on the following link:. This is the correct forum, however, support for sep. If support is not getting back to you in a timely manner, I would suggest sending them the link you just posted with your problem.
If you don’t have any firewall enabled, something else is causing this problem. At this point, unless someone else with knowledge of this product chimes in, support is going to be your best option.
I have reply to the support ticket that i have open with Symantec support about this problem and send them this forum link in order for them see if they understand what my problem is. Skip to main content Press Enter. Sign in. The secret is only revealed to you this one time, and so you will need to be sure to write it down along with the API key because you will need them both in order to install the dynamic DNS update service over on your Essentials server.
Enter your domain name, API key, and secret when prompted, and then complete the remainder of the set up wizard. See the next section of this tutorial for further details. Register a free account with Duck DNS. You will be assigned a token, and you can easily create a Duck DNS domain to match your existing domain name e. No big deal, just sign in with the account of your choice personally, I just created a reddit account and use it to sign in to Duck DNS with.
Instructions for doing that with GoDaddy can be found here and here. NOTE: If you already have a domain name configured such as a Microsoft personalized domain name , etc.
I have already set up my domain name. The second-level domain name is the label next to the top-level domain name extension. The second-level domain name is often created based on the company name, products, or services. The second-level domain is sometimes referred to as the hostname, which has an IP address associated with it. The domain name prefix identifies a subdomain. The subdomain name can be used to identify services, devices, or regions.
For example, Contoso Pharmaceuticals wants to allow remote users to log on to Remote Web Access, but does not want the website to be available to the public, so they create a subdomain that allows only users with appropriate permissions to access the website. Contoso Pharmaceuticals sets up remote. It is recommended that you use the default Remote as the prefix for your domain name. When you choose a domain name for your Internet website, you also need to specify the domain name extension that you want to use.
The extension is identified by the letters that follow the final period of any domain name. The formal term for the extension is the top-level domain or TLD. Generic domain extensions are three or more letters in length, and they are typically used by certain types of organizations. These domain extensions are two letters in length.
They are designed to be used by organizations in the country or region that is associated with that code. Some country-code top-level domains are restricted for use by citizens of that country or region. Others are available for use by anyone. To view the complete list of top-level domains, see the Internet Assigned Numbers Authority website. When you run the Set Up Domain Name Wizard, the wizard looks at your system information to determine your country or region.
The wizard then displays only those domain extensions that the participating providers in your area support. If the domain extension that you want does not appear in the list, you must choose a different domain extension to continue. Select an extension from the list that the wizard returned.
You may need to update or upgrade your domain name service if you purchased a domain name, but did not purchase a certificate. You must have a certificate for your domain name from your domain name service provider. Work with your domain name service provider to determine the type of certificate that you need.
The certificate can be one of the inexpensive certificates that are offered. However, you should review the documentation and features of higher level security certificates to determine if they better meet your business needs. If you want to create a backup copy of a certificate or use it on another server, you must export the certificate. For information about exporting certificates, see Export a Certificate. If you choose this option, the server does not monitor or maintain your domain name, and it does not alert you if there is a configuration issue.
You might also consider this option if any of the following is true:. You have an existing domain name from a domain name provider that is not currently a partner, and you do not want to transfer that domain name to a Windows Server Essentials supported domain name provider.
The wizard does not list the domain name extension that you want to use, but the extension is available from a domain name provider that is not currently a partner. If you choose to set up your domain name manually, work with your domain name service provider to create an A Record for your domain.
Decide on a host name, such as remote. This is the domain name prefix. In your domain name service providers configuration dashboard usually on their webpage , create the A record for the host name that you decided on in Step 1. If you do not have the option to obtain a static IP address from your ISP, you might also consider purchasing the Domain Name System DNS dynamic update protocol service from your domain name service provider or another service provider.
Import a trusted certificate when the wizard prompts you. If you do not have a trusted certificate, you can obtain one from one of the supported domain name providers listed in the wizard or purchase one from the trusted provider of your choice. For more information about a trusted certificate, contact your domain name provider.
Open a web browser, and then type www. In the search results, the name of your domain name service provider is listed under Registrar. You can customize your Remote Web Access site by adding a personal logo or background image. You can also add links on the Home page so that this information is available to all of your users.
Customize images for backgrounds and logos. Repair Remote Web Access. You can customize Remote Web Access by changing the title of the website, changing the background image and logo, and adding links to other websites on the home page. Test your changes on Remote Web Access. This section provides information about the images that you can use to customize Remote Web Access.
It is recommended that you use logo images that are 32×32 pixels. Hey, would you look at that? Dashboard looked much happier. Only thing I seem to have lost are the server backups from and In place upgrades from prior versions of Windows Server Essentials and even domain migrations are just going to end up causing you a lot of extra work and grief in the long run.
Thus, and as Robert Pearman mentions in his article, it only seems to present itself as an issue when doing an in place upgrade from prior versions of Windows Server Essentials to Windows Server Essentials. Nice find on locating and linking us to his fix for the problem though. Windows Server Essentials , etc. The wizard will then recognize the in place upgrade, and configure it accordingly.
I have been using this on a server of almost a year now with everything working great. I have upgraded my Windows 10 PCs to version and now they show offline and not available in the console. Doing that will force the connector software to skip joining the client computer to your domain a second time and messing up your user profile on the client computer.
Thereby saving you a lot of grief in the long run. I get the following error:. Can that be language related or build related page redirects me to What version of Windows Server vNext are you using? Received my first update for the experience role and all updated perfect. Thanks for your continious support Mike. The latest NET Framework 4. Great Guide. First time running through it. Everything went fairly smoothly minus some missing spaces in my copy paste in step 6 preventing service creation until step 8.
The system cannot find the file specified. InvokeEsse ntialsConfigureServiceCommand. You must of missed it while performing step 4 in the manual install instructions. Now there is a new build available: Windows Server Preview Build I could download that and upgrade, but that would be wise, I suppose?
Microsoft is currently releasing new builds of it at a feverous pace about once every week or two. I had a working setup a year or so ago when the article was published, but my recent attempts at this all fail. I went as far as installing server , updating it as of Jan 1 , installing the role, but not configuring it, then sharing the whole c drive. Went back to my box and wrote a script in cmd to run all the powershells in order, then robocopy the files.
Did the services, the firewall rule, and vpn fix. But I cannot start wssconfiguration from powershell. The solutions there were to ensure the config wizard was not run on the install. Does the installer available free with purchase of another product still work on the most recent server install?
Are you running the PowerShell cmdlet from an elevated i. Run as administrator PowerShell prompt? Good luck! Thanks for your reply, Im sure its much more straight forward with the installer, I need to look over your products and either choose the least expensive or see what seems interesting.
If you want to look at it, here is my script that I am running as admin as a notepad file saved as wsee.
I have tried it manually too, The error I get running it on a bare stock version of winserver with all the switches is. So its something in the files not allowing wssconfigurationservice to start. I was wondering if it had to do with the latest build versions of winserver or winserver, since this write up and the original source files are just over 2 years old.
A final question on the installer, If I license your least expensive product and use the installer on my dc, but then reimage it say a year down the line, or upgrade to , will your installer still work since its the same physical pc? This could possibly be due to a permissions issue on the following file:. If you simply re-install on the exact same Windows Server product edition e. Standard or Datacenter , and underlying hardware or VM configuration , then you will be just fine even after in place upgrading to , etc.
Perfect, thanks Mike, Im still looking into your products on what may be valuable in a homelab environment, but just to update. I did get the manual method working, my script actually had two typos in it, one line i robocopyed from z: to z: instead of c: thus not actually copying anything, that was the start menu and if you look closely at the wsssetupcmdlets copy, you will notice that i am copying it to the wrong directory, thus not allowing the setup to run.
I have corrected these errors, and all ran well. Thanks again for your pointers. Sorry to make a software dev read through my terrible batch programming. But hey, it was quick and dirty, and in the end after fixing typos, it did work. Im sure theres a more efficient way of writing it, but I like automation, which is why im still probably going to buy a product to look into the installer. Glad to hear that you found those typos, and correcting then resolved your issue.
Nice sleuthing! So hopefully that will just fix me up. Thanks for your support. Thanks again Mike, I plan to format and reinstall serverstandard prior to using your installer just to ensure nothing goes wrong. Its a Homelab and not production, so I can do that basically whenever I choose lol, but as for the VPN fix, I have already applied both of those.
The error I am getting is more similiar to what is described here: Set up Anywhere Access wizard completed with errors, VPN was not configured successfully. I am going to wait to see what happens when using your installer. Just to update, it seems like everything went well when using your installer, Anywhere Access and VPN have installed and configured successfully.
Perhaps Mike, you may want to look into silently installing this package with the WSEE Installer, just to save users that step. Folks will simply need to follow the download link that Microsoft provides and manually install the appropriate version of the Windows ADK on their servers for themselves if they want to enable the client restore feature.
I remember seeing this message when I used it last time, but I thought I could proceed at my own risk. Now it just ends the install. I do not care about any other pre-WSE19 features. Is there a way to only install the WS backups feature? Why not just convert i. Can I use a previous installer version to do the install anyways? It has worked perfectly for me on the server I have reloaded a few times. Hi Mike! I installed the Install WSE Experience on Server successfully and was able to configure everything per your excellent write up.
Please contact your administrator. Other than that, have you by chance disabled TLS 1. If so, then you might want to try temporarily re-enabling TLS 1. One thing I did not work out is whether you have to setup e. Is there a way to run the configuration wizard for the Essentials Experience rather than doing it through the command line?
If not, then it is probably worth calling out the need for these steps to be done as part of the preparation steps as, once setup it seems impossible to change some of these settings, at least if the server is the Primary Domain Controller. Glad to hear that the manual installation went well for you. WSEE sure does work really nice on it though. For more info on why see here. This is just one of the many things that the WSEE Installer nets you over attempting to do the installation manually.
The WSEE Installer will result in a MUCH more proper, complete, secure, and maintainable installation seeing as it does way more than I could ever possibly explain in a succinct list of manual install steps. Got the health warning that an update was available, so I downloaded and ran the updater. It seemed to work okay, but I still have the health warning.
Does it still come back again even after doing that? Thanks for bringing it to my attention. Thanks for looking into it! Have you done the tests? The Microsoft Online Integration Services seem to be a real mess. That being said… I broke down yesterday and set up a 30 day trial for Microsoft Premium , and tried testing out the integration stuff. Sure enough, it always fails with the the above mentioned generic error under both and Microsoft has also implemented something called security defaults in Azure Active Directory , and since enforcing the enabling MFA on all of your user accounts within 14 days is part of this security feature, you will need to disable it as follows:.
My question is how do I fix the issues with Microsoft Cloud Integration Services failing when configuring them? Unfortunately, there are just way too many steps involved in making the online services integration features work properly for me to be able to provide them within the succinct list of manual install steps which are already fairly lengthy and complicated.
If I already followed the guide and have WSEE working on Windows , but need to get Office Integration working can I just run the installer, or do I need to remove it and start over? I would agree but it would be a lot of work to rebuild this server. I ran the install and it appears to have worked.
Office integration is now working. Thank you for the help. Thanks for letting everyone know. Only I had prob with setup, but after I created domain manually, everything went smooth. Is the license somehow connected to a hardware fingerprint? Because the only thing that comes to mind is that I have upgraded my motherboard and cpu in my server since originally installing wse. Any way to get that fixed up?
Yes it is. Registration Key be reset in order to resolve that issue. I took a few days off to celebrate the resurrection of our Lord and Savior with friends and family. Can I deploy N.
For this scenario the branch office server have to be a dc? Please let me know. As mentioned in the main article above, the WSEE Installer is only made available to existing license holders of our software products e. Thanks Mike, Just wanted to confirm for other interested persons, the installation of WSEE on server standard which had been updated in place from a configured Server Essentials server.
The event logs indicated the error, which was the permissions on a registry key. All domain settings, Azure backup and other applications working without any changes. Thanks for the pointer to the permissions error on the registry key. Thanks for taking the time to let everyone know how the install went for you. Alas, after severe messing around to get VPN access working, the Devices tab no longer shows the Server itself. Is there any way to add the Essentials server back to the Server Device tab?
Hi Mike, now that server went into preview Announcing Windows Server —now in preview do you suggest to switch I always like to be as updated as possible or do I have to reinstall when final version is out. All of your settings, etc. What is your policy on refunds if by chance the installer does not work after purchasing a product for the purpose of downloading the installer?
The thread is a bit long. As stated on our Policy page , we have a no-questions-asked day refund policy on all of our software packages. That being said… Please do be aware that if you request a refund, then the license for your purchased product as well as for the WSEE Installer will be deactivated, and so any installation of the product or of WSEE that has been installed via the WSEE Installer will cease to function once the license has been deactivated. Thanks Mike!
After a bit of troubleshooting and help from everyone here I was able to get it working like a charm. Thanks a million! I do plan on still purchasing remoteapp. Thanks again! As mentioned last month May , thread is getting older however Mike is readily available to support his fine product line WSEE. With WSEE being so easy to work with, can continue working in my comfort level again within a home based domain.
Is it normal for users to lose connection and access to files after an update is installed with a reboot? I manually had to login them back into the connector at each computer. It is quite normal to lose connection installing e. Yes, it periodically checks the validity of the license, and to see if any updates are available for the WSEE bits that were installed. No personal information is sent as per our privacy statement.
Thank you for the response. We have strict firewall policies which will probably result in the connection being blocked. Does that mean we will not be able to use the WSEE installer? If so, do you recommend a manual install? Hi Mike I bought a new server, and as I see my license is assigned to another server. Which is quite right. Can I uninstall or delete the old server to free my license, or what? Setup all the Services and the firewall rule. NET folders to copy your list shows , but you mention in a previous post?
Checking the event log and it shows that it has two main errors on. Then I mentioned that I forgot to install the five features via powershell on the target server first. After doing that, the second run was successsful. Take a look at the adprep output and the group membership of the local Administrator Upgrade went fine and Essentials Dashboard went away. Somehow expected…. After that I have had the Dashboard back again and I have done some basic tests server backup Currently everything looks good, but for sure I will do some additional testing with clients and so on….
Glad to hear that your in-place upgrade to with WSEE manually installed worked out well. Thanks for sharing your experience with everyone. Before I attempt a rollback and test I wanted to check with this community to see if others are having the same problem or not. Thanks, Joe. If you sort the folder by date modified, then all of the most recent log files will appear at the top, making it easier for you to locate the more relevant ones to look through.
Thanks for the reply. The error has been intermittent since the update. The Health Assessment appears to run every 30 minutes. The error will sometimes clear itself but then may return with the next assessment. My WSEE was installed many many months ago using the installer.
Thanks again Mike! While you investigate I think I will try reversing the update on the non-critical server and let you know.
Whenever the health of the server is evaluated, a configuration file for the online services is automatically downloaded to the following location on the server:. Hopefully someone reports it to Microsoft and they correct the issue bug soon.
I would expect the error to remain constant if the config file is corrupt. And again and at least in my case across both of my servers, the error did not ever present itself on the dashboard prior to the update. If that makes sense. And so the Bing. Glad to do it…. Mike, I have now posted this problem on several forums including the Microsoft.
Do you have a link to where you posted it on the Microsoft. Unfortunately, if Microsoft is monitoring or participating in that forum they are staying silent on the matter. FYI, I have now corrected this particular issue in the latest Version Trying to install the server connector on a clean install of windows 10 21H1. Can anyone report success using the connector from windows 10 21H1?
And you are done. Every time you install a feature update for Windows 10, the connection between the server and the clients gets broken. I had blamed this on being a new version of windows, but after looking at logs I can see that it really boils down to a certificate on the server for https that is no longer valid, somehow… Going through the WSE RemoteAccess repair wizard seems to not work at all, despite many attempts.
The foo. Installer tells me, that my license is used on another server … Best regards. I read in the article that Server performs much better than which is great news because it has always been sluggish. But I am torn between or I mainly use this for backing up clients.
Any thoughts from anyone on what you would do? Windows Server is more secure offering both TLS 1. Thanks for the quick reply and advice. I will go with Server I am thinking of keeping it and let it update once a month and see if any of the Essentials files were updated. Thanks for figuring all this out. Am on with Mikes experience role installed now for couple of weeks. All very smoothly without ANY issues came form , highly recommended. I went with and all is working great. I do have one odd issue.
I am not sure if you are using it for client backups but when I set mine up I have an item called Local Disk in my Select which items to back up. I do have Halo series I bought from the Microsoft Store but have no idea why it sees some of these folders under an item called Local Disk. It is odd. Hi Mike, I had an Essentials and downgraded it to a standard server. Then I upgraded the server standard to a inplace. After I have removed it without restarting the wizard runs through but does not recognize the existing domain.
The server is DC with me. I know that thing like the back of my hand but it was missing!! Thank you so much for the prompt reply Mike! Maybe they should offer it as a paid add-on, folks like me would pony-up!
What is my least expensive option?? Perhaps allow people to donate to a charity of your choosing, then receive the password? I see now you recommend against doing this WSEE installation manually. For details see our Pricing page. Thx Mike! Last question. Specifically I have some saved PC backups of pre-rebuild and pre-Win11 upgrades that I would ideally like to keep a while longer.
Can you use Server Essentials in place of Server Essentials to extract the required files, reg keys, etc from? If not, then I strongly suggest that you go that route in order to ensure success. I did start out with a clean Standard standalone installation, as advised. In doing so, I got the password for the MediaAdmin service from the old AD, while the service is configured to use the password from the new AD which is now gone.
I wonder if you could simply delete the existing MediaAdmin and ServerAdmin managed service accounts and then just recreate them??? FYI, I found this text in some of the Microsoft documentation explaining what Essentials does on the server in regard to those accounts…. The MediaAdmin account is added as a member of the Administrators group.
Error trying to reset service account password. KurtH comment. Given your deep knowledge of Essentials you might know this: I have Windows Server with essentials experience installed but not the Remote Desktop Services role. This allows me to change the RD gateway https port number from to something else in my case, necessary because is already going to another LAN destination from my router. But now when I want to connect to a host on the LAN via Essentials Remote Web Access, it does not write the port number as a suffix to the gatewayhostname within the.
I wonder if there is some registry setting to update the gatewayhostname in the generated. As it stands it is necessary to manually change. Thanks for any info you might have. Software Created by Mike Craven. October 6, at pm Mike says:.
October 8, at am Mike says:. October 25, at am TheDoc says:. October 25, at pm Mike says:. October 25, at pm TheDoc says:. November 14, at am A. Tanner says:. November 14, at pm Mike says:. November 25, at pm Bob Jones says:. November 25, at pm Mike says:. November 29, at am Ralph says:. December 4, at pm Mike says:. December 6, at pm Bob Jones says:. December 6, at pm Mike says:. December 7, at pm Bob Jones says:. December 7, at pm Mike says:. December 15, at am Bobby Mangrum says:. December 15, at am Mike says:.
December 28, at pm Mike says:. December 29, at am Mike says:.
Performing an in-place upgrade of Windows Server | Compute Engine Documentation | Google Cloud
Security policies and defense against web and DDoS attacks. That way, if you ever encounter issues such as this one, you can just restore the server back to a time prior to when the problem first started occurring. Have you done the tests? Personally, I feel that unless you have some really pressing need to utilize features that are specific to Windows Server , that you should simply stick with using Windows Server Essentials instead.
– Turn on and configure Remote Web Access
How can you access your home office or small business network from the road? The key to this functionality is a set of Essentials features. Microsoft Data Access Components (MDAC) ; Microsoft Windows DAC Server R2 Foundation bit; Windows Server R2 Essentials bit. Install updates and restore access. After the upgrade is complete, run Windows Update to download and install any security updates. To install the security.